Products : PROMJet : Flash Emulator Order Information
PROMJet Order Information
This page contains PROMJet part numbers and ordering information. The user should start with a PROMJet device that matches or exceeds the size of the targeted Flash memory. The basic unit comes with support for 8-bit flash memory. Next, the user should choose the appropriate optional module for the desired functionality such as ICE, LPC or SPI support. If PROMJet is used with a target board that has the 50-pin header, it can be used directly with the board. Otherwise the appropriate adapter should be chosen to connect to the target board. Please consult with EmuTec or your local distributor for support and current pricing and availability.
Part Number | Description |
---|---|
PJ-4M-85 |
4 MBit PROMJet. (8Kx8 - 512Kx8). |
PJ-8M-85 |
8 MBit PROMJet. (8Kx8 - 1Mx8) or |
PJ-16M-85 |
16 MBit PROMJet. (8Kx8 - 2Mx8) or |
PJ-32M -85 |
32MBit PROMJet. (8Kx8 - 4Mx8) or |
PJ-64M-85 |
64MBit PROMJet. (8Kx8 - 8Mx8) or |
PJ-128M-85 |
128 MBit PROMJet. (8Kx8 - 16Mx8) or |
PJ-256M-85 |
256 MBit PROMJet. (8Kx8 - 16Mx8) or |
Part Number | Description |
---|---|
OPT-25NS |
Memory access speed upgrade from 85ns to 25ns. |
OPT-45NS |
Memory access speed upgrade from 85ns to 45ns. |
OPT-BWS |
Byte-Word-Switchable. Allows PROMJet to emulate 8bit and 16bit Flash memory. |
OPT-ICE |
Permit memory accesses On-The-Fly without target impact and includes WBR. |
OPT-LPC |
Adds support for LPC FLASH memory in addition to parallel Flash support. |
OPT-SPI |
Adds support for SPI FLASH memory in addition to parallel Flash support. |
OPT-VV |
Variable voltage support for low voltage FLASH memory (1.5 - 5Volt). |
Part Number | Description |
---|---|
ADP-32PLCC |
50-pin to 32-position PLCC adapter. For LPC support, specify ADP-32PLCC-LPC. |
ADP-44PLCC |
50-pin to 44-position PLCC adapter to support 16-bit Flash/EPROM memory. |
ADP-44PS |
44-pin PSOP adapters for 8/16 bit Flash memory. Since there is multiple FALSH pinouts, please specify the part number of the FLASH used. |
ADP-xxSO |
8-pin or 16-pin SOIC adapter. Supports SPI serial Flash pinout in 8 and 16-pin SOIC. Please specify the desired adapter when ordering. |
ADP-HPLA |
Interfaces PROMJet 50-pin header to HP Logic Analyzer (166x / 16xxx) cables. |
ADP-LAN |
Ethernet TCP/IP adapter with 2 PROMJet ports. It works with PROMJet Windows and Linux and ftp software. |
ADP-xxDIP |
50-pin to DIP adapter. It comes in 32-pin for 8-bit and 40/42-pin for 16-bit Flash memory support. |
ADP-xxTS |
TSOP Flash memory adapter. It comes in 40-pin for 8-bit and LPC FLASH support as well as in 48 and 56-pin for 8/16-bit support. Since there is multiple FALSH pinouts, please also specify the part number of the FLASH used. |
CBL-2x32DIP |
Adapts a 16-bit PROMJet to two 32-pin DIP 8-bit EPROM or FLASH memory pinout. |
CBL-2x32PLCC |
Adapts a 16-bit PROMJet to two 32-pin PLCC 8-bit EPROM or FLASH |
CBL-50FLEX |
50-pin PROMJet FLEX 6" (15cm) extension cable. |